...
Then, go to the “Settings” tab and check the AoIP settings available under Input/Output Setup list:
...
AES In processed:
Set this to “On” to allow the source to be upmixed according to the selected preferred upmixer. In this case, the input is limited to 8ch with a fixed mapping on the ISP side that should be replicated in the source device.
...
AES67 Frequency:
The global network sampling rate can be set to 48 or 96 kHz. The ISP AoIP sampling rate must be the same as the other AoIP devices on the network.
...
Click on it to access the AoIP module WebUI.
AES In processed:
Set this to “On” to allow the source to be upmixed according to the selected preferred upmixer. In this case, the input is limited to 8ch with a fixed mapping on the ISP side that should be replicated in the source device.
Edit 32 Channels digital input mapping:
Clicking on the “Edit” button allows Allows you to manage the 32 inputs mapping manually. It is possible to connect each input to a particular speaker type:
...
| Page Tree | ||||
|---|---|---|---|---|
|