Here is where to look for the OSD setting in the WebUI.
Prerequisites
Your ISP must be powered ON, up-to-date and connected to your LAN.
Your ISP must be equipped with a 7+2 eARC HDMI 2.0 (or above) board.
If you have an ISP Elite MK1 using an HDMI board older than the 7+2 eARC, the OSD will not be available in the settings.
Instructions
Access your ISP’s WebUI in installer mode.
Click on the Settings page:
Under the HDMI settings, select the OSD screen format matching your TV or projector. Select “off” if you don’t want to use the OSD.
Add Comment