Page Comparison

Versions Compared

Key

This line was added.
This line was removed.
Formatting was changed.

Here is a quick guide on how to design EQs for a channel in the WebUI.

Prerequisites

Info
How is our Bell EQ implemented: Bell EQ filter implementation by StormAudio

Your ISP must be powered ON and connected to your LAN.
Your computer has to be connected to the same LAN.
You need to access the ISP’s “Main Speakers” tab of in the installer WebUI.

Instructions

Enter the Theater you want to equalize.
Image Modified
Choose the profile you want to equalize.

...

Image Added
Enter the EQ settings of the channel you want to equalize.
Image Modified
Click on the “Create EQ” button.
Image Modified
Select an EQ filter type, you can choose between:
Image Modified
1. Low Pass, with multiple slope types.
2. Low Shelf
3. Bell
4. High Shelf
5. High Pass, with multiple slope types.
Enter the frequency you want for that EQ.
Image Modified
Enter the gain dB value or slope for the EQ.
Image Modified
Enter the Q value for that EQ type. The higher the Q, the

...

narrower the EQ will be.
Image Modified
Save your EQ. Your EQ will be instantly applied to your speaker.
Image Modified

Info
You can enable/disable an EQ by clicking the “Active” button. You can chose to display or not an EQ by ticking the “Graph” box at the end of each EQ row. You can delete an EQ at any time by clicking the bin at the end of each row. Deleted EQs cannot be recovered.

...