Here is where to look for the OSD setting in the WebUI.
Prerequisites
Your ISP must be powered ON, up-to-date and connected to your LAN.
Your ISP must be equipped with a 7+2 eARC HDMI 2.0 (or above) board.
| Warning |
|---|
If you have an ISP Elite MK1 using an HDMI board older than the 7+2 eARC, the OSD will not be available in the settings. |
Instructions
Access your ISP’s WebUI in installer mode.
...
Go to the Settings page:
...
Under the HDMI settings, select the OSD screen format matching your TV or projector display size.
Select
...
“Off” if you don’t want to use the OSD.
...
OSD is available and can be enabled for both HDMI outputs independently.
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|