...
Your ISP must be powered ON and connected to your LAN.
Your computer must be connected to the same LAN.
Connect the primary port of the AoIP module to your LAN with a RJ45 cat5e or above cable.
...
ISP WebUI configuration for AoIP
First, access the ISP’s installer WebUI.
Create your Theater for the room using the configurator.
Set your AoIP speakers/channels as Digital (D) in the ISP WebUI. A is for Analog XLR:
Enter the “Settings tab”:
Click on the “AES67 Module IP Address” hyperlink under the “Input/Output Setup”. This is the local IP of your AoIP module:
You will then be directed to the AoIP module’s WebUI, allowing you to configure it:
. See next section.
AoIP module WebUI
...
General settings
...
Device name:
...
Page Tree | ||||
---|---|---|---|---|
|