...
Download the latest firmware from the Client Portal for your unit. The firmware name should be:
For ISP Elite (MK1/2/3) & ISR & 2ISP: “isp_[version][date].ssp”
For ISP Core & Evo: “isp_core_[version][date].ssp”
Your ISP needs to be powered on and connected to your LAN.
You need to access the ISP’s installer WebUI.
| Warning |
|---|
2.1r0 |
| Note |
|---|
3.5r7 If the current version of your ISP is older than 3.5r7, you need to first upgrade your device to firmware 3.5r7 before you can update to 4.0r1 and newer versions. Firmware 3.5r7 and newer versions are available in the Client Portal. After upgrading from older versions to 3.5r7, you need to adjust your Channel Setup for Dirac to group Multi-way or Active speakers channels. |
| Note |
|---|
4.2r0 Before upgrading to the 4.2r0 version and above, you need to update your unit to the 4.1r2 version. |
| Note |
|---|
4.6r0p2 Firmware 4.6r0p2 needs to be applied twice on ISP Elite MK3, ISP Core, ISP Evo and ISR Fusion. The boot sequence needs to be updated before the actual update. |
Instructions
Check your Firmware version in the WebUI.
Perform a Configuration Backup
...
to keep your previous firmware ISP configuration in a file.
Press the “Firmware Upgrade” button and a pop-up window will show up.
Select the .ssp file you downloaded earlier from your computer.
Press Upload to start the update. After a few minutes your ISP will reboot using the new firmware.
...
Perform another Configuration Backup to keep your new firmware ISP configuration in a file.
Related articles
| Filter by label (Content by label) | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|