StormAudio - Knowledge Center

Saving and restoring an ISP configuration

Owned by Thibaud, created
Last updated: May 31, 2023
1 min read

How to save and restore the parameters and settings of your ISP.

Prerequisites

Your ISP must be powered ON, up-to-date and connected to your LAN.

You need to access the Expert or Installer WebUI.

Instructions

  1. Enter the System page of the WebUI.

  2. Save your configuration file by clicking on the “Backup Configuration” button :

    This allows you to save an archive folder of your configuration, including Dirac calibrations, theaters, inputs and outputs mapping, presets… You can do it at any time and as many times as you want.

  3. In case you need to restore a configuration (after a factory reset for example), simply click on the “Restore Configuration” button :

    After a few seconds, your ISP will reboot with the configuration file you loaded.

StormAudio - Knowledge Center