Here is a quick guide on how to setup a calibration of your room in your ISP with the Dirac Live Calibration Tool.
Prerequisites
Your ISP needs to be powered ON and connected to your LAN.
You need to access the Installer WebUI.
You need to download and install the latest version of the Dirac Live Calibration Tool on your computer.
Instructions
Navigate to the Main Speakers landing page and select edit on the theater you would like to calibrate.
Locate the Dirac button in the upper center of the page and click it.
A dialogue window will pop up providing relevant calibration information, scroll down and click Start New Calibration.
Open the Dirac Live Calibration Tool software, you should see the StormAudio ISP showing up in the first step of the calibration.
If the StormAudio isp-host does not show up in the Dirac Live Calibration Tool, you can click the IP tab in the upper left corner and enter the IP address of the unit manually.
0 Comments