How to setup your ISP and computer for a Dirac Live Calibration.
If you want to know how to perform a basic Dirac Live calibration, watch our tutorial video:
https://www.stormaudio.com/how-to-perform-a-basic-dirac-live-3-calibration/
Prerequisites
Your ISP must be powered ON, up-to-date and connected to your LAN.
You need to access the Installer WebUI.
You need to install the latest version of the Dirac Live software on your computer.
Download it here=>https://www.dirac.com/live/downloads/
In order to autosave your Dirac Live projects to the cloud, you need to create an account on their website then log yourself in the Calibration Tool before starting a calibration. This save on the cloud allows you to retrieve your project from anywhere at any time once logged in.
You can always choose to save your projects on your computer (Ctrl+Shift+S).
Your computer must to be connected to the internet to run the Dirac Live calibration tool. The filter processing is made on their servers.
Instructions
Navigate to the Main Speakers landing page and select edit on the Theater you would like to calibrate.
Locate the Dirac button at the center top of the page and click it.
A dialogue window will pop up, providing some information about the calibration, scroll down and click Start New Calibration.
Open the Dirac Live Calibration Tool software, you should see the StormAudio ISP showing up in the first step of the calibration.
Then follow the Dirac Live Calibration tool steps.
If the StormAudio isp-host does not show up in the Dirac Live Calibration Tool, click the IP button in the top left corner and manually enter the IP address of the unit.
0 Comments