Create a Theater

Here is a quick guide on how to create a Theater that fits your room.

Prerequisites

Your ISP must be powered ON, up-to-date and connected to your LAN.

You need to access the Main Speakers page in the Installer WebUI.

Select create a Theater. Delete the previous one if you need the outputs.
Select Configure to enter the Theater configurator.
In the first page of the configurator, you need to define the number of base layer speakers in your room. Make it match your room layout. Click Next when done.
In the second page, you need to define the number of height layer speakers in your room. Make it match your room layout. Click Next when done.
In the third page, you need to define the number of top layer speakers in your room. Make it match your room layout. Click Next when done.
In the fourth page, you’ll see a summary of the Theater you just created. Verify it matches your room layout. Click Save to return to the WebUI Theater configuration.

If you use multiple speakers for a single channel, click on the “+” under “Replication” for the channel where it is required.