Learn how to set a preset for low latency between the input and the output of your ISP. With this mode enabled, the latency drops to around 15ms.
Prerequisites
Your ISP must be powered ON, with firmware 4.4r1 or above installed and connected to your LAN.
You need to have a Theater created. See: Create a Theater
You need to access the Presets page in the Installer WebUI. See:Access the WebUI - Configuration
Instructions
In the Presets page, find the low Latency checkboxes
Check the box of a preset to enable the low latency mode for that preset, and voilà!
Note that Dirac profiles cannot be low latency enabled as its filtering adds latency.
If the checkbox is greyed out, change your profile in that preset for a non Dirac one.
Add Comment