Here is a quick guide on how to design EQs for a channel in the WebUI.
Prerequisites
Your ISP must be powered ON and connected to your LAN.
Your computer has to be connected to the same LAN.
You need to access the ISP’s “Main Speakers” tab of the installer WebUI.
Instructions
Enter the Theater you want to equalize.
Enter the EQ settings of the channel you want to equalize.
Select an EQ type, you can choose between:
Low Pass
High Pass
Bell
Enter the dB value or slope for the EQ.
Enter the Q value for that EQ type. The higher the Q, the narrowest the EQ will behave.
You can add up to 20 EQ per channel.
You can chose what curve you want displayed by ticking the “Graph” box at the end of each EQ row.
You can disable an EQ by unticking the “Enabled” box at the end of each EQ row.
Add Comment