StormAudio - Knowledge Center

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Current »

Here is where to look for the OSD setting in the WebUI.

Prerequisites

Your ISP must be powered ON, up-to-date and connected to your LAN.

Your ISP must be equipped with a 7+2 eARC HDMI 2.0 (or above) board.

If you have an ISP Elite MK1 using an HDMI board older than the 7+2 eARC, the OSD will not be available in the settings.

Instructions

  1. Access your ISP’s WebUI in installer mode.

  2. Click on the Settings page:

    image-20241107-141751.png

  3. Under the HDMI settings, select the OSD screen format matching your TV or projector display size.

    • Select “Off” if you don’t want to use the OSD.

    • OSD is available and can be enabled for both HDMI outputs independently.

      image-20241107-141838.png
  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

StormAudio - Knowledge Center