Here is where to look for the OSD setting in the WebUI.
Prerequisites
Your ISP must be powered ON, up-to-date and connected to your LAN.
Your ISP must be equipped with a 7+2 eARC HDMI 2.0 (or above) board.
Instructions
Access your ISP’s WebUI in installer mode.
Click on the Settings page:
Under the HDMI settings, select the OSD screen format matching your TV or projector. Select “off” if you don’t want to use the OSD.
If your ISP is using an HDMI board older than the 7+2 eARC, the OSD will not be available in the settings.
Add Comment