/
Use Phantom Center channel

StormAudio - Knowledge Center

Use Phantom Center channel

Here is a quick guide on how to activate the Phantom setting, rerouting your center channel to the front left and right channels (in case you don’t have a center speaker).

Prerequisites

Your ISP must be powered ON, up-to-date and connected to your LAN.

You need to access the Installer WebUI.

Instructions

  1. Create a Theater.

  2. In the first page of the configurator, if you create a Theater that is 3.1 or larger, you’ll see a little box under the “Phantom” column for the Center channel.

    Tick that box in and your Center channel will be rerouted to your main Left and Right channels.

  3. Proceed to complete your Theater creation and hit save at the end of the Configurator process.


Related articles

Related content

Theater creation
More like this
Create a sub Theater
Create a sub Theater
More like this
ISP "Party Mode" | All channels stereo
ISP "Party Mode" | All channels stereo
More like this
ISP Signal Generator
ISP Signal Generator
More like this
How to create a SphereAudio Headphone Zone
How to create a SphereAudio Headphone Zone
More like this
NF - Center Shift
More like this

StormAudio - Knowledge Center