StormAudio - Knowledge Center

Set IR Presets & Inputs

Owned by Thibaud - Support Admin, created
Last updated: Jun 20, 2022
1 min read

Here is how to set the Presets & Inputs for discrete selection through IR commands.

Prerequisites

Your ISP must be powered ON, up-to-date and connected to your LAN.

You need to access the Settings page in the Installer WebUI.

Instructions

  1. Select “IR Remote Control” in the Settings Navigator on the left:

  2. You can now assign Inputs & Presets to an ID. You can set up to 6 Inputs and 5 Presets:

The Settings are automatically applied upon selection, you do not need to save. You can try to control the ISP Inputs & Presets with the IR remote straight away.

Related articles

StormAudio - Knowledge Center